Home
Company Profile
Our Products
Contact Us
Select Language 
English
Spanish
French
German
Italian
Chinese (Simplified)
Japanese
Korean
Arabic
Portuguese
SDVC20-L: 10A
SDVC20-L: 10A
Price And Quantity
- Pair/Pairs
- 1
- Pair/Pairs
- 1 INR
Product Specifications
- IP67
- 50-60 Hz Hertz (HZ)
- 85-440 V Volt (V)
- 1.5-3W Energy
- Switching Signal
- 180*106*58(L*W*H, mm) Millimeter (mm)
- 960g (without accessory) Grams (g)
- 1 year
Product Description
FEATURES :
Automatic Voltage Regulation: Eliminate feed speed variation caused by mains voltage fluctuation.
Soft Startup: In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds: 4 preset feed speeds can be stored and output by external short-circuit signal. Remote ON/OFF Control: The controller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value by mis-operation, the controller will stop its output to protect the controller and vibratory feeder.
Short-Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
Automatic Voltage Regulation: Eliminate feed speed variation caused by mains voltage fluctuation.
Soft Startup: In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.
Preset Speeds: 4 preset feed speeds can be stored and output by external short-circuit signal. Remote ON/OFF Control: The controller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
Photoelectric ON/OFF Control: The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.
Remote Speed Control: Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.
DC Control Output: The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
Overheat Protection: If internal temperature of the controller gets too high, the controller will stop its output to protect itself.
Overcurrent Protection: If output current exceeds its rated value by mis-operation, the controller will stop its output to protect the controller and vibratory feeder.
Short-Circuit Protection: If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
TECHNICAL SPECIFICATION
| ITEM | Range | Unit | Description | |
| Min | Max | |||
| Input voltage | 85 | 440 | V | AC RMS Value |
| Output voltage | 0 | 440 | V | Less than Input voltage |
| Output Current | 0 | 10 | A | |
| Output Frequency | 50/100 | Hz | Mains Frequency is 50Hz | |
| 60/120 | Hz | Mains Frequency is 60Hz | ||
| Output Power | 0 | 2200 | VA | |
| Output Waveform | Tangent Sine | | | |
| Voltage Adjustment Accuracy | 1 | V | | |
| On / OFF Delay | 0 | 20 | S | |
| ON / OFF Delay Accuracy | 0.1 | S | | |
| Soft Startup Time | 0 | 10 | s | |
| DC Control Output Voltage | 22 | 26 | v | DC output associated with ON / OFF Control |
| DC Control Output Current | 0 | 200 | mA | |
| Standby Power Consumption | 1.5 | 3 | w | |
| Display Method | 4 | digit | LED Digital Tube | |
| Control Method | 1.5 | v | Remots Speed Control voltage | |
| Standard TTL Electric Level | v | Switching Signal | ||
| / | | 4 Buttons + LED Screen | ||
| Work Space Temperature | -10 | 60 | C | Non-condensing |
| Work Space Humidity | 10 | 85 | % | |
Trade Information
- Cash in Advance (CID) Cheque Cash Advance (CA)
- 1 Per Week
- 1 Week
- 3 % Extra
- All India
- ISO
Contact Us
