SDVC21- S:6A

Features

·         Soft Startup : In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage from 0 to the preset value when startup.

·         Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.

·         Remote ON/OFF Control : The controller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.

·         Photoelectric ON/OFF Control : The CUH Intelligent Photoelectric Sensor can be connected to turn on/off the controller.

·         Remote Speed Control : Output Voltage of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1-5V DC signal.

·         DC Control Output : The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.

·         Overheat Protection : If internal temperature of the controller gets too high, the controller will stop its output to protect itself.

·         Overcurrent Protection : If output current exceeds its rated value by mis-operation, the controller will stop its output to protect the

·         controller and vibratory feeder.

·         Short-Circuit Protection : If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.

·         Technical Specifications